Products in this Range
- Quick, clean and easy way to join lengths of LED flexi strip
- 15cm cable
- Suitable for 8mm PCB LED tape
- Suitable for 3528, 5050 & 2835 single colour LED strip
- Ideal for IP20 rated, but also usable with IP65 where PV coating has been removed from solder joints
- Can be used with 12VDC and 24VDC LED strip
- 8mm PCB LED Flexi Strip
- Parallel light strips
- Ideal for light boxes
8W8-2-20 is a 8mm PCB solderless wire to wire joining connector ( not IP rated), designed to link 2 lengths of single colour 8mm PCB LED flexi strip where it may need to have a gap in the illumination or be installed at angles the tapes flexibility would not allow.
Simply cut your LED strip, to the required length; at the designated cut points, slide the PCB into the connector, so that the solder points are under the metal arms of the connector, then click the cover shut to complete the connection.
Suitable for use with our IP20 rated 8mm PCB single colour 3528, 5050 & 2835 LED chip size tapes. Can also be used with our 8mm PCB IP65 rated tapes if the waterproof polyurethane layer is removed from the contact points first. The polyurethane can be removed using a sharp craft blade, take care when doing this not to damage the PCB, LEDs or connection points. To retain the IP65 rating of the LED tape adequate sealing should be applied around the connections.
The wire length is 15cm.
2pcs per pack.
Maximum load on these solderless connectors is 3A; please see specifications information below for a guide to our tapes and the maximum length you can run when used with them.