8C-2-20 Solderless In-Line Joining Connectors for 8mm LED Flexi Strip

8C-2-20 is a 8mm PCB solderless in-line joining connector (not IP rated), designed to link 2 lengths of single colour 8mm PCB LED flexi strip quickly, cleanly and easily.Simply take your two lengths of LED flexi strip, slide the PCB into the connector, so that the solder points are under the metal arms of the connector, then click the cover shut to complete the connections and create a longer length of LED tape.Suitable for use with our IP20 rated 8mm PCB single colour 3528, 5050 & 2835 LED chip size tapes.��Can also be used with our 8mm PCB IP65 rated tapes if the waterproof polyurethane layer is removed from the contact points first. The polyurethane can be removed using a sharp craft blade, take care when doing this not to damage the PCB, LEDs or connection points. To retain the IP65 rating of the LED tape adequate sealing should be applied around the connections.5pcs per pack.Maximum load on these solderless connectors is 3A; please see specifications information below for a guide to our tapes and the maximum length you can run when used with them.