88-MP puts together our 8mm PCB solderless wire to wire connector, in-line joining connector and tail connector connectors in a handy pack, designed for users of our 5mtr 8mm PCB LED flexi strips who cut the reel into multiple lengths for their application requirements. Allowing you to link several lengths together and create a new end wire for connection.
Out of stock
Products in this Range
- Quick, clean and easy way to join lengths of LED flexi strip
- Suitable for 8mm PCB LED tape
- Suitable for 3528, 5050 & 2835 single colour 8mm LED strip
- Ideal for IP20 rated, but also usable with IP65 where PV coating has been removed from solder joints
- Can be used with 12VDC and 24VDC LED strip
- 8mm PCB LED Flexi Strip
- Parallel light strips, longer in-line lengths & new end wires
- Ideal for light boxes
88-MP puts together our 8mm PCB solderless connectors in a hand pack, designed for users of our 5mtr 8mm PCB LED flexi strips who cut the reel into multiple lengths for their application requirements. The pack includes our 8mm wire to wire connector, a 8mm in-line joining connector and 8mm tail connector allowing you to link several lengths together and create a new end wire for connection. Potentially giving you 3 usable lengths of tape from one reel of single colour 8mm PCB LED flexi strip.
8mm wire to wire connector – link 2 lengths of single colour 8mm PCB LED flexi strip where it may need to have a gap in the illumination or be installed at angles the tapes flexibility would not allow.
8mm in-line joining connector – designed to link 2 lengths of single colour 8mm PCB LED flexi strip quickly, cleanly and easily to create one continuous length.
8mm tail connector – to connect on to the end of a length of single colour 8mm PCB LED flexi strip to create an end wire for connection to suitable LED driver
To connect any of the above solderless connectors to our 8mm PCB LED flexi strip simply cut your LED strip, to the required length; at the designated cut points, slide the PCB into the required connector, so that the solder points are under the metal arms of the connector, then click the cover shut to complete the connection.
Suitable for use with our IP20 rated 8mm PCB single colour 3528, 5050 & 2835 LED chip size tapes. Can also be used with our 8mm PCB IP65 rated tapes if the waterproof polyurethane layer is removed from the contact points first. The polyurethane can be removed using a sharp craft blade, take care when doing this not to damage the PCB, LEDs or connection points. To retain the IP65 rating of the LED tape adequate sealing should be applied around the connections.
Maximum load on these solderless connectors is 2A; please see specifications information below for a guide to our tapes and the maximum length you can run when used with them.
|Voltage||LEDs Per Mtr||Watts per Mtr||Maximum Run Length|