10W10-RGB-20 is 10mm PCB wire to wire joining connector for use with our 10mm LED Flexi strip. Ideal for use where you need a small gap in the illumination or for the light to be installed at angles the tapes flexibility would not allow2pcs per pack

Compare
SKU: 10W10-RGB-20 Category: Tag:

Other Documents

Products in this Range

Part number Input Voltage PCB Width IP Rating Finish Dimensions
1010-MP Request quote
10C-2-20 3 ~ 24VDC IP20 White 14.2 x 15.3 x 4.6mm Request quote
10C-2-65 3 ~ 24VDC IP65 White 15.3 x 15.4 x 8.1mm Request quote
10C-RGB+W-20 3 ~ 24VDC 12mm IP20 White 16.5 x 15.3 x 4.6mm Request quote
10C-RGB-20 3 ~ 24VDC IP20 White 14.2 x 15.3 x 4.6mm Request quote
10C-RGB-20- IP20 Request quote
10C-RGB-65 3 ~ 24VDC IP65 White 15.3 x 15.4 x 8.1mm Request quote
10C10-2-20 3 ~ 24VDC IP20 White 14.2 x 15.3 x 4.6mm Request quote
10C10-2-65 3 ~ 24VDC IP65 White 15.3 x 15.4 x 8.1mm Request quote
10C10-RGB+W-20 3 ~ 24VDC 12mm IP20 White 16.5 x 15.3 x 4.6mm Request quote
10C10-RGB-20 IP20 Request quote
10C10-RGB-65 IP65 Request quote
10W10-2-20 3 ~ 24VDC IP20 White 14.2 x 15.3 x 4.6mm Request quote
10W10-2-65 3 ~ 24VDC IP65 White 15.3 x 15.4 x 8.1mm Request quote
10W10-RGB+W-20 3 ~ 24VDC 12mm IP20 White 16.5 x 15.3 x 4.6mm Request quote
10W10-RGB-20 Request quote
10W10-RGB-65 Request quote
12C-RGB+W-20 3 ~ 24VDC 12mm Request quote
12C12-RGB+W-20 3 ~ 24VDC 12mm Request quote
12W12-RGB+W-20 3 ~ 24VDC 12mm Request quote
88-MP Request quote
8C-2-20 3 ~ 24VDC White 12.5 x 15.3 x 4.6mm Request quote
8C-2-65 3 ~ 24VDC White 15.3 x 13.4 x 8.1mm Request quote
8C8-2-20 3 ~ 24VDC White 12.5 x 15.3 x 4.6mm Request quote
8C8-2-65 3 ~ 24VDC White 15.3 x 13.4 x 8.1mm Request quote
8W8-2-20 3 ~ 24VDC White 12.5 x 15.3 x 4.6mm Request quote
8W8-2-65 3 ~ 24VDC White 15.3 x 13.4 x 8.1mm Request quote

Features

  • Quick, clean and easy way to join lengths of LED flexi strip
  • 15cm cable
  • Suitable for 10mm PCB LED tape
  • Suitable for RGB colour 10mm wide LED strip
  • Ideal for IP20 rated, but also usable with IP65 where PV coating has been removed from solder joints
  • Can be used with 12VDC and 24VDC LED strip

Applications

  • 10mm PCB LED Flexi Strip
  • Parallel light strips
  • Ideal for light boxes

Description

10W10-RGB-20 is a 10mm PCB solderless wire to wire joining connector, designed to link 2 lengths of RGB colour 10mm PCB LED flexi strip where it may need to have a gap in the illumination or be installed at angles the tapes flexibility would not allow.Simply cut your LED strip, to the required length; at the designated cut points, slide the PCB into the connector, so that the solder points are under the metal arms of the connector, then click the cover shut to complete the connection.Suitable for use with our IP20 rated 10mm PCB RGB colour LED chip�� tapes.��Can also be used with our 10mm PCB IP65 rated tapes if the waterproof polyurethane layer is removed from the contact points first. The polyurethane can be removed using a sharp craft blade, take care when doing this not to damage the PCB, LEDs or connection points. To retain the IP65 rating of the LED tape adequate sealing should be applied around the connections.The wire length is 15cm.2pcs per pack.Maximum load on these solderless connectors is 3A; please see specifications information below for a guide to our tapes and the maximum length you can run when used with them.


Additional Information

Weight 0.10 kg
Product Type
Accessory Type