10C10-RGB-65 is a 10mm PCB tail connector for use with our 10mm LED Flexi strip. Ideal for use as an end wire on a cut length of our LED Flexi strip to create the end wire for connection to suitable LED driver.15cm wire length.2pcs per pack

SKU: 10C10-RGB-65 Category: Tag:

  • Quick, clean and easy way to terminate lengths of LED flexi strip ready for power connection
  • 15cm cable
  • Suitable for 10mm PCB LED tape
  • Suitable for RGB colour LED strip
  • Ideal for IP65 where PV coating has been removed from solder joints
  • Can be used with 12VDC and 24VDC LED strip
  • 10mm PCB LED Flexi Strip
  • End wire on cut lengths of LED Flexi Strip

10C10-RGB-65 is a 10mm PCB solderless tail connector (not IP rated), designed to connect on to the end of a length of RGB colour 10mm PCB LED flexi strip to create an end wire for connection to suitable LED driverSimply slide the PCB into the connector, so that the solder points are under the metal arms of the connector, then click the cover shut to complete the connection.Suitable for use with our IP65 rated 10mm PCB RGB colour LED chip�� tapes. When with our 8mm PCB IP65 rated tapes�� the waterproof polyurethane layer is removed from the contact points first. The polyurethane can be removed using a sharp craft blade, take care when doing this not to damage the PCB, LEDs or connection points. To retain the IP65 rating of the LED tape adequate sealing should be applied around the connections.The wire length is 15cm.2pcs per pack.Maximum load on these solderless connectors is 5A; please see specifications information below for a guide to our tapes and the maximum length you can run when used with them.

Additional information

Weight 0.00 kg
Product Type
IP Rating
Accessory Type



There are no reviews yet.

Be the first to review “10C10-RGB-65 Solderless Tail Connectors for 10mm LED Flexi Strip Ends”

Your email address will not be published.