10C10-2-65 Solderless Tail Connectors for 10mm LED Flexi Strip Ends

10C10-2-65 is a 10mm PCB solderless tail connector (not IP rated), designed to connect on to the end of a length of single colour 10mm PCB LED flexi strip to create an end wire for connection to suitable LED driverSimply slide the PCB into the connector, so that the solder points are under the metal arms of the connector, then click the cover shut to complete the connection.Suitable for use with our IP65 rated 10mm PCB single colour 3528, 5050 & 2835 LED chip size tapes. When with our 8mm PCB IP65 rated tapes�� the waterproof polyurethane layer is removed from the contact points first. The polyurethane can be removed using a sharp craft blade, take care when doing this not to damage the PCB, LEDs or connection points. To retain the IP65 rating of the LED tape adequate sealing should be applied around the connections.The wire length is 15cm.2pcs per pack.Maximum load on these solderless connectors is 5A; please see specifications information below for a guide to our tapes and the maximum length you can run when used with them.