The Connect LED light bar series are mains powered and have been developed to be surface mounted and configurable in almost any combination up to 4 metres in length. These light bars have a low profile, to suit kitchen cabinet lighting and under shelf lighting in particular, but not exclusively.

SKU: CON210W Category: Tag:

  • 200mm of light length
  • 30 LEDs per fitting
  • Warn White light output
  • Slimline bar suitable for cabinet lighting, up lighting, accent lighting etc.
  • Easy installation, multiple configurations
  • Simple and safe low voltage on/off control
  • Reverse polarity protected
  • Constant current power technology, ensures balanced light output across each fitting
  • Suitable for 24VDC applications
  • Suitable for 24VDC vehicle application
  • Simple link up capability, allowing up to 4 meters of lighting from 1 driver
  • Rugged Aluminium extrusion with easy fit mounting points.
  • Kitchen cabinets
  • Shelving
  • Cornice lighting
  • Alcove lighting
  • Cabinet lighting
  • Up lighting
  • Back Lighting
  • Accent lighting
Input Voltage 24VDC
Current 250mA
Power Consumption 3.2W
LED Type 3528
LED Qty 30
Dimensions 223.6 x 30 x 12.3mm
Light Length 200mm
Weight 62g
Angle 120°
Colour Temperature 2800-200K (Warm White)

The Connect LED light bar series are mains powered and have been developed to be surface mounted and configurable in almost any combination up to 4 metres in length. These light bars have a low profile, to suit kitchen cabinet lighting and under shelf lighting in particular, but not exclusively , where a clean diffused light is required.CONNECT LED light bars utilise 3528 type LEDS, are wrapped in a rugged, yet pleasing to the eye, aluminium extrusion with easy fit mounting points & magnetic backside.�� The LED light bars can be joined together using the straight, corner or linking cable so corners or tighter angles are not an issue.CON210W has a 200mm light length, warm white colouring and is suitable for either 24VDC inputs. CON210W can be connected directly to the optional 90 degree corner connector, link up cable connector or straight line straight connector interconnect and be used with or without the switch unit then a suitable LED power supply.

Additional information

Weight 0.10 kg
Product Type
LED Chip Type
Beam Angle
Dimensions
Input Voltage
IP Rating
LED Colour
LEDs Per Metre
Lumens
Output Current
Power
alternative-sku 786-8963
tape-length , ,

CON210W

Reviews

There are no reviews yet.

Be the first to review “CONNECT 210W LED Light Bar – Warm White”

Your email address will not be published.