Suppliers of commercial LED lighting and power solutions
PowerLed BLADE floodlight

Introducing BLADE Series LED Floodlights

BLADE Series LED Floodlights IP65 Rated are a professional range of LED Floodlights offering IP65 rating, available in 150W, 200W, 240W & 300W models, with a colour temperature range of 4750K to 5250K. The case of Blade has been designed for effective heat dissipation and in turn offers both better cooling and an increase to the LED lifetime, in particular the L70 figures, by channelling the heat away from the LED array. The LED array design ensures a uniform light output, we use market Leading Philips Lumileds which offer a higher Efficacy coupled with a far slower falloff of light output performance. These two factors ensure our light output is on average 10-15% higher than the equivalent offering.

With an impact rating of IK08 the case provides protection against external mechanical impact to 2-5 joules, it is also IP rated to IP65 so is dust tight and protected from powerful water jets, such as intense rain or high pressure hosing. The case finish is also salt spray tested and UV stable, so is suitable for coastal applications.

The beam angle offered is wider than many competitors that boast the same technology, allowing for better coverage with fewer fittings. Our PFC is also higher & we have better conversion efficiency, which is vitally important when considering payback calculations.

To further extend the uses of BLADE we can add a daylight sensor to the case, without damaging the IP rating, and upgrade the coating to be chlorine resistant for specialist applications.

The BLADE floodlight has been extensively tested to the following criteria:-

Salt Spray Test
IEC 60068-2-52 specifies the application of the cyclic salt mist test to components or equipment designed
to withstand a salt-laden atmosphere as salt can degrade the performance of parts manufactured using
metallic and/or non-metallic materials.

International Protection (IP) Rating
IEC 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of
protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and
water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical
Commission (IEC). The equivalent European standard is EN 60529.

CE Certificate of Conformity
CE marking is a certification mark that indicates conformity with health, safety, and environmental
protection standards for products sold within the European Economic Area (EEA). This also includes EMI,
EMS, Low Voltage Directive and Energy Related Products Directive.

ECA compliance Certificate
Photometric Reports
Driver Data
Philips LumiLEDS Chip data

Copies of these certificates and reports are available upon request

View product page